Posted by christian
(22.214.171.124) on February 16, 2005 at 07:39:08:
In Reply to: Reading eeprom contents from a basic card posted by rod on February 16, 2005 at 06:33:03:
No, according to the manual, the READ EEPROM command is disabled in RUN-state unless encryption with key #0 is active. That means: If you don't add a key with the number 0 to your BasicCard, it is completely impossible to read the EEPROM with that command in RUN-state. If you have configured a key #0, only people who know this key can read back the EEPROM, e.g. the issuer (you) can recover data from a damaged card.